Framing The Walls For Our Front Porch

Let’s frame this porch. I start by laying the walls of 16” on center.
The walls are 10’ 3” tall- I mark this on the side of the house, minus 3” for the double plate, and 2 ½” for height of the laser.
Because this concrete is sloped, I’m going to measure each stud individually using the laser and a tape measure.
This goes a lot faster with a helper. He can mark the measurement for each stud on the layout, and I write down the measurement on every board I cut so they get installed in the right order.
Because the bottom plate is pressure treated- I’m using hot dipped galvanized nails.
Next, I layoff and install the top plates. Even though the porch is sloped away from the house below- the top of the wall is perfectly level.
I built a box header for above the entrance, because it’s a gable end there’s almost no roof load, but this will help stiffen up the wall.
When building a wall in place, I find it a lot easier to install the header before putting in the jacks. I just used a block to hold it in place until I nailed it.
Now I put in the jacks- making sure they nice and snug.
Finally, I install the double top plate- making sure to stagger the overlaps.
This porch is gonna get a curved roof and an arched opening. Make sure to like and subscribe to see the rest of the build. @hausplans

#build #howto #carpentry #framing #construction #diy #contractor

Comments

  1. @Kade-q3f

    Great video Hausplans! Surprising that the new guy actually did some work and not sit in a porta john and whatch tik tok

  2. @jeremiahjackson4031

    If you really pay attention and watch, this guy will truly explain how you can build whatever you want. Love these videos man, you’ve earned your success 😎

  3. @GaryT1952

    Later in your life, you will look back on this build and be thankful you had "The New Guy" by your side ❤️🐕🪖

  4. @Dude-hr4oh

    Mr. George, how much did you pay for the new guy? "Two treats and a bowl of water" He's a good potato😃👍

  5. @iwatchytftv9371

    Long format videos? You are definitely ready for it. I love these shorts but have trouble following along and would love to see it over a longer time. I know you have to complete things fast in construction but please you would grow so much if you could stretch this content out longer.

  6. @felixdenheijer7596

    For a sloped wall, use the formule y=ax+b to calculate the height of the studs. Especially for longer walks it’s way easier and faster. Ask chatgpt for further explanation of the formule 😉

  7. @hereafterforever2071

    I'm so glad the New Guy was helping you not make mistakes. You couldn't have done it without him. 😆 What a team you make!😍

Comments are closed.