Thank you, short and very easy to understand; your videos are helping me a lot
techpals
Thank you that is a very efficient method and clear instructions to apply them
Zamphzibaha Baha
Thanks for this tutorial.
Bill Parker
Hi Do I have a setting wrong? I make 2 squares I select circle I hover over the corner till the corner of the square goes yellow and place the 4 circles. I then select all 4 circles and set them to equal size and that works. I then click the two corners and the horizontal line and then the constrain button and then on the vertical axis. now if i try to move any side of my square or the corner all that moves is the square and not the circles. I have tried and tried but not getting the circles to move with the square im only just starting with cad so would any help would be appreciated as i have a 3D printer and almost finished building a router using 5mm sheet metal. Thanks for any replies.
Crimson Raven
Is there a way to turn off multi-select? I accidentally turned it on and cannot stop selecting multiple lines. I can only toggle lines as selected or unselected.
Broddi Hansen
Great tutorial, but is there a way to see what constrains are left, I mean instead of searching by clicking on the model ?
archangel20031
This one video was so understandable, I'll subscribe! Now I have to go to his channel and see them in order.
TheMeJustMe75
I am new to Free CAD but not to the way of sketches but I wasn't sure how to add dimensions until now. I previously worked in SolidWorks and Pro-E. This is a great video, thanks!
Nigel Foulds
Excellent tutorials, way better learning by example. Cheers 😉
Robin Kli
Perfect series, you should get in contact with the developer, because you are doing massive advertisement.
Giulio Buccini
This rocket tutorials helped me a lot! A huge thank!
Laszlo Selymes
We have what we want to hurray 😀 I like this 😀 Perfect simple tutorial ! Thank you very much!
Adi Sieker
Thank you for your tutorials. I'm finally starting to understand how CAD works and how I can get the stuff done I want todo. Make things easier than using Inkscape. 🙂
Dinesh Kumar
hai . i am new to this . can u tell me how to decrease size of red color distance value which is displaying on sketch editing screen
kd williams
Great tutorial!
RoscoeT99
Great. Thanks
Andrew Mack
Thank you. Excellent tutorial which helps me to understand the capabilities of the software 🙂 I would not know these things without your help!
Tony Jackson
Superb tutorials, quickly and clearly to the point – thank you.
peacedude65
Outstanding series, thank you very much!
puceloVA
Thanks, this tutorial is very useful.
Koen Hufkens
Thanks for the tutorial, appreciate it! Just what I needed…
olle bolle
Excellent tutorials! Fun, interesting, short and to the point! Job well done! =) thx!
Arthur Oostinga
Thank you very much, I'm new to CAD but it's all clear to me.
Hari Wiguna
Bram, Great job on these FreeCAD tutorials! Lessons are short, concepts are explained clearly with good examples. Thank you very much for taking the time to create these tutorials. I really appreciate it.
Mark
Thanks for the video series. I am learning a lot. On this one, I had trouble making it a pad, I found out I had to toggle the construction lines that were connecting the circles. On to next lesson…
sorstudios
Problem solved! I purchased Cambam $150 excellent headache fix
Comments
Thank you, short and very easy to understand; your videos are helping me a lot
Thank you that is a very efficient method and clear instructions to apply them
Thanks for this tutorial.
Hi Do I have a setting wrong?
I make 2 squares I select circle I hover over the corner till the corner of the square goes yellow and place the 4 circles. I then select all 4 circles and set them to equal size and that works. I then click the two corners and the horizontal line and then the constrain button and then on the vertical axis. now if i try to move any side of my square or the corner all that moves is the square and not the circles. I have tried and tried but not getting the circles to move with the square im only just starting with cad so would any help would be appreciated as i have a 3D printer and almost finished building a router using 5mm sheet metal. Thanks for any replies.
Is there a way to turn off multi-select? I accidentally turned it on and cannot stop selecting multiple lines. I can only toggle lines as selected or unselected.
Great tutorial, but is there a way to see what constrains are left, I mean instead of searching by clicking on the model ?
This one video was so understandable, I'll subscribe!
Now I have to go to his channel and see them in order.
I am new to Free CAD but not to the way of sketches but I wasn't sure how to add dimensions until now. I previously worked in SolidWorks and Pro-E. This is a great video, thanks!
Excellent tutorials, way better learning by example. Cheers 😉
Perfect series, you should get in contact with the developer, because you are doing massive advertisement.
This rocket tutorials helped me a lot! A huge thank!
We have what we want to hurray 😀 I like this 😀 Perfect simple tutorial ! Thank you very much!
Thank you for your tutorials. I'm finally starting to understand how CAD works and how I can get the stuff done I want todo. Make things easier than using Inkscape. 🙂
hai . i am new to this . can u tell me how to decrease size of red color distance value which is displaying on sketch editing screen
Great tutorial!
Great. Thanks
Thank you. Excellent tutorial which helps me to understand the capabilities of the software 🙂 I would not know these things without your help!
Superb tutorials, quickly and clearly to the point – thank you.
Outstanding series, thank you very much!
Thanks, this tutorial is very useful.
Thanks for the tutorial, appreciate it! Just what I needed…
Excellent tutorials! Fun, interesting, short and to the point! Job well done! =) thx!
Thank you very much, I'm new to CAD but it's all clear to me.
Bram, Great job on these FreeCAD tutorials!
Lessons are short, concepts are explained clearly with good examples.
Thank you very much for taking the time to create these tutorials. I really appreciate it.
Thanks for the video series. I am learning a lot. On this one, I had trouble making it a pad, I found out I had to toggle the construction lines that were connecting the circles. On to next lesson…
Problem solved! I purchased Cambam $150 excellent headache fix
Is there anyway to change everything to inches?